مبدل فیبرنوری 2 کانال HDMI دوطرفه، 1 کانال ویدئو دو طرفه، 4 کانال تلفن و 1 کانال اترنت 10/100mbps

مبدل فیبرنوری 2 کانال HDMI دوطرفه، 1 کانال ویدئو دو طرفه، 4 کانال تلفن و 1 کانال اترنت 10/100mbps

امتیاز :
کد محصول : S-2bHDMI1bV4PE
'/>
موجود نیست

The S-2bHDMI1bV4PE, two bidirectional HDMI video, one bidirectional Analog video, four channel Telephone, and a port 10/100Mbps Ethernet as fast Ethernet , use advanced analog and digital technologies for pursuing high performance data transmission over fiber optic. The transceiver can send signals about 20 kilometers on fiber (optionally the distance will be extend).

This S-2bHDMI-1bV4PE link works properly in critical (very high and too low) temperature environments and work for years with out any degradation in expected quality.

This product is fully transparent from front-end video device perspective. Just four fiber cores are used to transmit all mentioned signals which can be any kind of fiber cables. The equipment also adopt non-compressed analog (video composite) signal in PAL or NTSC mode.

This Optical Transceiver is easily monitored by virtue of LED indication of working status and without any electrical or optical regulation on site.

This product is released in 1U-rack-mountpackages.

 

 

  Link Budget

1- Multi mode transmitters:

FiberType

Lose

Maximum TransmissionDistance

Linkpower

wavelength

62.5 um

1 (dBm/Km)

500(meter)

-19.5~-16(dBm)

850、1310(nm)

 

2- Single mode transmitters:

FiberType

Lose

Maximum TransmissionDistance

Linkpower

wavelength

9/125um

0.5 (dBm/Km)

20(Kilo meter)

-8~-5(dBm)

13101550(nm)

9/125um

0.5 (dBm/Km)

40(Kilo meter)

-5~-3(dBm)

13101550(nm)

9/125um

0.25 (dBm/Km)

60(Kilo meter)

-3~-1(dBm)

13101550(nm)

9/125um

0.25 (dBm/Km)

100(Kilo meter)

0~+3(dBm)

13101550(nm)

Video ANALOG Characteristics

Interface:

Input/ Output Impedance:

Input/ Output Voltage:

Bandwidth:

Sampling:

Differential gain:

Differential phase:

SNR:

BNC

75Ω (unbalanced)

Peak value = 1 V

Max value = 1.2 V

10MHz

Up to 20MHz high speed sampling

10%-90% APL

DG < 1%(Typical value)

10%-90%APL

DP <0.8°(Typical value)

S/N ≥ 70dB

 

Video HDMI Characteristics

Interface:

Display standards switching

Max support depth

Max Bandwidth:

Max pixel clock

HDMI connector

Automatic

12bi color

5.4Gbps

225MHz

 

Telephone/Switch Characteristics

Direction:

Bandwidth

Modulation

Data Agreement:

Interface supporting terminal:

Connecting material:

Bi-directional

8Khz

PCM

Fully supporting all kinds of

Telephone signal

General telephone PBX and PSTN

point to point (telephone to telephone or telephone to switch)

Ethernet Characteristics

Rate of data:

Supporting agreement

Modulation

Data type

Interface connector

Working format:

100 Mbps

IEEE802.3U 100Base-TX, 10/100M

PCM

Auto-adaptation, the default is 100Mbps working condition

RJ-45

Full-duplex or half-duplex