دارای 18 پورت Rj45 و 16 پورت PoE
هر 16 پورت دارای پهنای باند Mbps10/100
دارای دو پورت آپلینک TP/SFP Combo
همه پورتها به صورت Auto Negotiation & Auto MDI/MDIX
پشتیبانی همه پورتها از Wire-Speed forwarding
پشتیبانی از استاندارد 802.3af IEEE
توان 15.4 وات برای هر 8 پورت PoE
کل پاور خروجی برای همه پورتها 250W
روش انتقال: Store-And-Forward
پهنای باند: 8.8Gbps(Non-bloking)
بافر مموری: 2.75Mb
استفاده از Military-Grade Chip با قابلیت فوق پایدار
بدون فن (Fan less)
دارای سطح 2 محافظت در برابر رعد و برق
ساخته شده با بهترین کیفیت و طول عمر بالا
دارای قابلییت ذخبره انرژی و محافظت محیطی
درای قابلیت تشخیص اتوماتیک درخواست PoE تجهیزات
کیس فلزی با سطح حفاظتی IP30
دارای تاییدیه از سازمان تنظیم مقررات
دمای عملکرد از C ° 10- تا C ° 60
میانگین نرخ زمان خطا (MTBF): 100.000hours
ابعاد:44mm 440 x 270x
وزن: g2500
This equipment can prepare a field that power and data can feed from a single point, using Power over Ethernet (PoE) over a single cable. One 16 Fast Ethernet ports prepared any 10/100 Mbps link and all ports can supply industry-standard IEEE 802.3af power for every POE standard devices. All data gathered can transmit via 2 combo ports that support 2 giga bit/s with SFP modules.
Regards to using advanced auto-sensing algorithm the Sepitam-PS216E-DC gives power only to IEEE802.3af front-end standard devices, so don't worry about connecting PoE or non-PoE devices to this feeder. Additionally, this good gives up the power when PoE devices are disconnected. Intelligently, this PoE Switch can recognized automatically PoE demands of devices, speed, duplex, and cable type using Auto Uplink™.
Here available 2 mode of management system and un management that you must select when order.
| Product Name | PoE Switch with Eight 10/100M Ports and Gigabit Combo Port |
| Product Model | Sepitam-PS216E-DC |
| Connector | 16x 10/100M copper cable RJ45 PoE ports+ 2*Gigabit combo ports Ports (all ports support MDI/MDIX) |
| Transfer Mode | Store-And-Forward |
| NetworkMedium | 10BASE-T: Cat3/4/5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP(≤100 meter) 1000BASE-TX: Cat5 or later UTP(≤100 meters); Uplink |
| |
| Performance Specifications | Bandwidth: 8.8Gbps (non-blocking)
Network Latency (100 to 100M bps): maximum delay less than 20 microseconds
Packet Buffer Memory: 2.75M
Address Database Size: 4K
MTBF: 100,000 hours |
| Network Protocols and Standards | IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow Control; IEEE 802.3af DTE Power via MDI; IEEE 802.3af |
| LEDs Status | System: power supply;
Every Port: connecting, PoE working status |
| Power | Maximum PoE switch power:250 W
PoE port power:15.4W(Max)
Power input: AC100-240V 50/60Hz; (every country use a custom power plug) |
| Dimensions/Weight | Dimensions: 440x270x44mm
Weight: 2500g |
| Working Environment | Operating Temperature:-10 ° ~ 60 ° C;
Storage Temperature: -10 ° ~ 75 ° C;
Humidity: 10% ~ 90%, non-condensing;
Storage Humidity: 10% ~ 95%, non-condensing;
Working Altitude: 3000 m (10,000 ft); Storage Altitude: 3,000 m (10,000 ft) |
| Radiation | CE mark, commercial
FCC Part 15 Class B
VCCI Class B
EN 55022 (CISPR 22), Class B |
| Safety | CE Mark ,commercial
CE/LVD EN60950 |
| Warranty | 2 year warranty |
